Skip to Main Content
Applied Ion Systems
  • Home
  • Products
  • Services
  • Collaborations
  • Sponsors
  • Resources
    • Propulsion Systems
    • Reports
    • Gallery
    • Blog
    • DIY Science
    • Simulations
  • Contact
  • LICENSES AND TERMS OF USE
  • Home
  • Products
  • Services
  • Collaborations
  • Sponsors
  • Resources
    • Propulsion Systems
    • Reports
    • Gallery
    • Blog
    • DIY Science
    • Simulations
  • Contact
  • LICENSES AND TERMS OF USE

Blog

R&D, Walkthroughs, Updates, and System Builds

High Vacuum System Example Design Walkthrough – 03.2
27 Feb 2018

High Vacuum System Example Design Walkthrough – 03.2

by AppliedIonSystems | posted in: Walkthrough | 0

COMPARISON BETWEEN SYSTEM V2 CALCULATIONS AND ESTIMATES USING DUSHMANS TABLE In the previous Chapter 3.1, we explored the calculations for system conductance and effective speed in molecular flow for the V2 design iteration. This was calculated using a rather long … Continued

dushmans table, high vacuum design, molecular flow
High Vacuum System Example Design Walkthrough – 03.1
27 Feb 2018

High Vacuum System Example Design Walkthrough – 03.1

by AppliedIonSystems | posted in: Walkthrough | 0

CALCULATIONS FOR CONDUCTANCES AND EFFECTIVE SPEEDS IN MOLECULAR FLOW FOR VARIOUS PROCESS GASES SYSTEM DESIGN V2 SECTION 1 – Design Overview Based on the prior mentioned availability of a 2.75” CF inline valve, a decision was made to redesign V1. … Continued

high vacuum design, high vacuum systems, molecular flow
High Vacuum System Example Design Walkthrough – 02
27 Feb 2018

High Vacuum System Example Design Walkthrough – 02

by AppliedIonSystems | posted in: Walkthrough | 0

INITIAL HIGH VACUUM SYSTEM REQUIREMENTS In this section of the walkthrough we will be going over the basic initial design objectives, parameters, requirements, and starting model of this high vacuum system. Before building any system, it is very important to … Continued

high vacuum design, high vacuum systems
High Vacuum System Example Design Walkthrough – 01
27 Feb 2018

High Vacuum System Example Design Walkthrough – 01

by AppliedIonSystems | posted in: Walkthrough | 0

INTRODUCTION This is the first of a short series dealing with the high vacuum calculation and design of a small scale multipurpose high vacuum system for use in a wide range of charged particle beam and plasma experiments. Since this … Continued

engineering, high vacuum
Welcome to Applied Ion Systems
27 Feb 2018

Welcome to Applied Ion Systems

by AppliedIonSystems | posted in: Introduction | 0

Welcome to the first post in the Applied Ion Systems blog series. Applied Ion Systems is a self-funded research initiative that explores the research, design, engineering, testing, and development of a wide range of physics systems, focusing primarily on devices … Continued

fusor, high vacuum, physics

Posts navigation

« 1 … 20 21 22 23

Follow @

© 2025 Applied Ion Systems - WordPress Theme by Kadence WP