Skip to Main Content
Applied Ion Systems
  • Home
  • Products
  • Propulsion Systems
    • Active Thruster Systems
    • Retired Thruster Systems
  • Services
  • Thruster Rental Program
  • Reports
  • Collaborations
  • Sponsors
  • Gallery
  • Blog
  • DIY Science
  • Contact
  • LICENSES AND TERMS OF USE
  • Home
  • Products
  • Propulsion Systems
    • Active Thruster Systems
    • Retired Thruster Systems
  • Services
  • Thruster Rental Program
  • Reports
  • Collaborations
  • Sponsors
  • Gallery
  • Blog
  • DIY Science
  • Contact
  • LICENSES AND TERMS OF USE

Peltier Chiller Module Build Pictures

Peltier Cold Side Copper Chiller Block Subassembly
Peltier Chiller Cold Side Cross-Sectional Isometric
Peltier Chiller Cold Side Cross-Sectional Top
Peltier Chiller Module Assembly Stage 1
Peltier Chiller Module Assembly Stage 2
Peltier Chiller Module Assembly Stage 3
Peltier Chiller Module Full Assembly
Copper Peltier Chiller Block
Aluminum Water Blocks for Peltier Hot Side
Peltier Chiller Step 1 - Taping Copper Block Holes
Peltier Chiller Step 2 - Preparing Copper Blocks
Peltier Chiller Step 3 - Filling Holes
Peltier Chiller Step 4 - Curing Epoxy
Peltier Chiller Step 5 - Epoxy Blocks End to End
Peltier Chiller Step 6 - Clamping Blocks
Peltier Chiller Step 7 - Roughing Copper Block Sides for Epoxy
Peltier Chiller Step 8 - Applying Epoxy to Sides
Peltier Chiller Step 9 - Clamping Blocks
Peltier Chiller Step 10 - Cutting Brass Reinforcement Bar
Peltier Chiller Step 11 - Epoxy Brass Reinforcement Bar
Peltier Chiller Step 12 - Laying Out Copper Baseplate
Peltier Chiller Step 13 - Baseplate Epoxy
Peltier Chiller Step 13 - Spreading Baseplate Epoxy
Peltier Chiller Step 14 - Epoxying Cold Side
Peltier Chiller Step 16 - Planning Nylon Manifold
Peltier Chiller Step 15 - Nylon Bar for Manifold
Peltier Chiller Step 17 - Cutting the Manifold
Peltier Chiller Step 18 - Drilling The Manifold
Peltier Chiller Step 18 - Manifold Inlet and Outlet
Peltier Chiller Step 19 - Widening Manifold Channels
Peltier Chiller Step 20 - Epoxying Endblock
Peltier Chiller Step 21 - Clamping Endblock
Peltier Chiller Step 22 - Epoxying Inlet Block
Peltier Chiller Step 23 - Clamping Inlet Block
Peltier Chiller Step 24 - Cutting Side Supports
Peltier Chiller Step 25 - Epoxy Side Support 1
Peltier Chiller Step 26 - Epoxy Side Support 1
Peltier Chiller Step 29 - Adding Peltiers
Peltier Chiller Step 30 - Adding Hot Side Heat Sinks
Peltier Chiller Step 31 - Bottom Plate Layout
Peltier Chiller Step 32 - Drilling Plate Holes
Peltier Chiller Step 33 - Top Plate
Peltier Chiller Step 33 - Cutting Foam
Peltier Chiller Step 34 - Inserting Chiller Block
Peltier Chiller Step 35 - Drilling Holes
Peltier Chiller Step 36 - Adding Bolts
Peltier Chiller - Completed Assembly 1
Peltier Chiller - Completed Assembly 2

Follow @

© 2022 Applied Ion Systems - WordPress Theme by Kadence WP